{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

No More Searching - You'll Always Know Where to Go with DITEK

by Teddi Strassburger on February 2, 2017

In critical life safety situations, protecting your valuable fire alarm equipment from transient surges is not only imperative - it's required by NFPA regulations. 

fire-spread.jpg

DITEK's DTK-2MHLPFWB surge protectors that will interrupt signal provide robust protection for signaling loop circuits in a compact package. The MHLPF series has been designed to interrupt the circuit if they self-sacrifice, instead of shorting the circuit to ground. This makes troubleshooting much easier. The 2MHLPF series should be used where there are multiple surge protectors on the same circuit, such as on a campus, in an apartment complex or in any multiple-building facility with SLC or NAC circuits running between buildings. The 2MHLPF series opens the circuit so the sacrified module is easy to identify. 

Offer your customer a worry-free solution for protecting their valuable fire alarm systems by combining the DTK-2MHLPF series with the DTK-120SRD, a 120V AC power surge protector with dry contacts for remote monitoring of surge protection status. Install the 2MHLPF module series in a DITEK TSS enclosure for a total surge protection solution. 

Alarm professionals trust DITEK!

Click here to learn more about DITEK.

Click here to contact your local Accu-Tech representative. 

Topics: Ditek surge protection

Subscribe To Our Blog