{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

Protecting your Network Against Power Surges and Spikes

by Bobby Salerno on March 1, 2017

Each year billions of dollars in revenue are lost due to theft, property damage, employee waste and frivolous lawsuits. In many cases, your company’s security system may be your only witness.  These systems are critical business assets and 100% “uptime” is vital.  However, power surges and voltage transients on network data lines can leave your Ethernet equipment inoperable when needed most!

IP cameras mounted on a building or light pole are directly connected to the rest of your network equipment. A surge that energizes an externally mounted IP camera's power and data connection can travel into a building, taking out network switches, servers and other valuable Ethernet equipment. 

To help prevent surges from entering your building and your network, DITEK recommends installing surge protection on all IP-enabled devices that run from building-to-building or are externally mounted. Every network switch or Power over Ethernet device that links IP-enabled security devices should also be protected in the system racks. 

Protecting your network equipment from surges and spikes is simple and cost-effective compared to the value of ensuring the safety and security of your critical business assets. DITEK’s Power over Ethernet surge protectors are designed with state-of-the-art circuitry to provide superior protection against voltage surges and spikes.  These devices pass Gigabit Ethernet data speed, and are PoE Plus and High PoE ready for high wattage applications. 

It costs much less to avoid a disaster than to recover from one… is your network fully protected?

 

DITEK.jpg

 

Learn more about surge protection from DITEK

Learn more about Accu-Tech here

 

Topics: Ditek surge protection protected Security IP

Subscribe To Our Blog