{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

Now is the Time to Fix Your Data Center Hot Spots!

by Bobby Salerno on January 31, 2018

Are you puzzled by the hot spots in your data center?  In most data centers, like the one depicted in the chart below, cooling resources are overabundant but airflow is insufficiently distributed for rack-level cooling - which results in hot spots.

RLE- How Do Spots Form image

In situations like these, we recommend the HotSpotr.  The HotSpotr intelligent air mover can be used with any high-flow tile to increase cooling effectiveness in your data center. HotSpotr intelligent air movers deliver cooling to server racks and eliminate hot spots without depleting airflow required by other servers and rows within your facility. Using its included temperature sensors, the HotSpotr automatically maintains safe rack inlet temperatures, enhancing the effectiveness of your CRAC units.

Easy installation allows you to immediately eliminate hot spots and improve airflow. HotSpotrs fit seamlessly into raised floor environments and are completely non-disruptive to other systems.  No server downtime or server rack movement is required for installation. Units use less than 127 mm (5”) of underfloor depth, eliminating the clutter of portable fans and spot coolers.

With HotSpotr, localized cooling and airflow is matched to individual rack heat loads in real-time, optimizing cooling energy while increasing efficiency and, most importantly, protecting your IT assets from server downtime!

HotSpotr data sheet

Learn more about the HotSpotr

Learn more about RLE Technologies

Learn more about Accu-Tech 

Topics: RLE Technologies datacenter cooling system Triad Floors

Subscribe To Our Blog