{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

Keep Your Systems Powered and Up to Code with Tripp Lite

by Teddi Strassburger on May 16, 2017

In the event of an emergency, it is imperative that first responders can quickly communicate over the network to get help. Trust in Tripp Lite's Public Safety DAS solutions to keep your systems powered and up to code! 

Screen Shot 2017-05-12 at 3.55.53 PM.pngAccording to NFPA, systems require 99% coverage in critical areas and 90% coverage in general-use areas. A public safety DAS is only effective if it receives a constant, uninterrupted stream of power. In the event of a power failure, the system can go down, cutting off communication access. Public safety applications require the central communication hub, typically found in or around the facility, to have 24-hour uninterrupted power to ensure clear signals across the communication networks. Tripp Lite's Public Safety DAS solutions not only provide backup runtime to connected components, but also protect equipment against damaging spurks and spikes that can cut an installation's lifespan in half. In addition, Tripp Lite's RELAYIOCARD, an internal contact closure management card, allows you to easily monitor and control the UPS conditions, status and alerts in real-time. This management card is an easy addition to the solution, as it meets code that mandates alarms must be generated once systems have 70% power remaining.

The global public safety in-building wireless DAS market is expected to grow from $404.2 million in 2016 to $1,740.1 million by 2021 - be part of this growing market by attaching Tripp Lite. 

Check out Tripp Lite's Public Safety Solutions: 

Solution 1: 300W - 400W Applications
SMART750RMXL2U 750VA/600W UPS System

BP24V36-2US 24V 2U Battery Pack
RELAYIOCARD Internal Contact Closure Accessory Card

Solution 2: 500W - 1200W Applications
SMART1500RMXL2UA 1500VA/1350W UPS System
BP36V27-2US 36V 2U Battery Pack
RELAYIOCARD Internal Contact Closure Accessory Card

Solution 3: 1000W - 1800W Applications
SMART2200RMXL2U 2200VA/1920W UPS System
BP48V27-2US 48V 2U Battery Pack
RELAYIOCARD Internal Contact Closure Accessory Card

Check out Tripp Lite's full line of products that fit within any application here

Click here to learn more about Tripp Lite.

Click here to contact your local Accu-Tech representative. 

Topics: Tripp Lite DAS power public safety

Subscribe To Our Blog