{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

Tripp Lite's Solution for Providing Redundant Power to Your Rack

by Teddi Strassburger on November 1, 2016

At capacities of 5kW and above, the most practical way to provide redundant power to 208V server racks has been to connect redundant 3-phase rack PDUs to redundant power supplies in each server. Until now…

Tripp Lite presents the 3-Phase ATS PDU! Tripp Lite's PDU supports loads up to 8.6, 12.5 or 17.3kW. Plus, it provides rapid coordination of unsynchronized phases without dropping loads and operates with high efficiency and reliability required for data center applications. Let's look at how Tripp Lite's 3-Phase ATS PDU solution racks up against traditional PDU solutions.