{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

Celebrating Five Years of the Fluke Networks Versiv™ Family of Cabling Certification Testers

by Teddi Strassburger on July 11, 2018

fluke networks versiv 18215-BlogGraphic-white-FINALFluke Networks takes testing to new levels with Versiv™. This year, we're celebrating the fifth anniversary of the introduction of Versiv testers, including the DSX CableAnalyzer™, OptiFiber™ Pro and CertiFiber™ Pro certification testers. Versiv allows you to continually add new capabilities without having to purchase a new tester, and Fluke Networks keeps adding new features to help you work more efficiently at the job site. 

Versiv makes it easy to get set up and start testing. LinkWare Live was introduced in 2014 for uploading results, and since then, uploading has gotten faster. Fluke Networks also added the ability to track the location of your Versiv testers, confirm the status of device software and calibration on all of your testers and set up test parameters - all remotely from any location transmitted via the cloud. 

Versiv has decades of Fluke Networks troubleshooting expertise built in, meaning it can pinpoint a connector with too much crosstalk, cabling that doesn't meet spec or even water in the cable. Versiv tests are also fast - Category 6A can test in nine seconds, and dual fiber loss tests in three. This is three and four times faster than the DTX tester, respectively. Versiv features SmartLoop™ technology, which enables you to perform bidirectional OTDR testing on two fibers at once with instantly averaged results - without moving the tester to the other end. 

Fluke Networks continues to release updates to Versiv, adding new features like enhanced notifications and software/calibration reminders. With its modular design, swappable testing modules and superior product support, Versiv has you covered for a multitude of testing situations and environments.

Contact your local Accu-Tech representative to learn more about Versiv. 

Topics: Fluke Networks Versiv fluke cable testing

Subscribe To Our Blog